TECHNICAL RESOURCE SITE for products manufactured or supplied by ASIX s.r.o.
Product information is available on ASIX.net, where you can also find out how to buy them.

Home > Programmers > Testers

2018-02-03

Testing software for ASIX programmers

Troubleshooting software allowing basic hardware test of FORTE and PRESTO programmers.

FORTE

⤓ TESTER_FORTE.ZIP
(293 955 B, 2017-05-05)

PRESTO

⤓ TESTER_PRESTO.ZIP
(223 146 B, 2013-02-15)

Notes

Before running application, PRESTO USB drivers must be installed and PRESTO connected.
Typical testing with no voltage on VDD requires to switch VDD from PRESTO on (in VDD&AUX options box) to allow power supply for output drivers.
There are three different voltage levels on VDD: "<2V", ">2V" and "5V".
VPP (13V) can be applied to P pin without any voltage on VDD. With 13V on, pin P reads unpredictable value.
Pins D and I have very weak pull-downs so they should be read as log.0 when output is tristated.
Pin read values are refreshed about twice per second.

ASIX TESTING SOFTWARE END USER LICENSE AGREEMENT

The TESTING SOFTWARE is not a standalone product, it is an integral part of programmers made by ASIX s.r.o. It can be installed on any computer where some of ASIX programmers will be used. The software can be used free of charge.

Legitimate user of ASIX programmers is allowed to download the TESTING SOFTWARE updates free of charge from ASIX' website. User may not modify, reverse engineer or sell the software. The software may not be used with products of other manufacturers.

The software is provided "as is", without any warranty that it is error-free.

Testing software for discontinued programmers

Testing software for the discontinued PICCOLO, PICCOLO GRANDE and CAPR-PI programmers can be found in museum.