| EQUIPMENT: |
EduKit84
+ emulator |
EduKitBeta
+ MU Beta |
PVK40
+ programmer |
PVK40
+ K2 + MU Beta |
| Level I - core and basic I/O operation |
01 - Wire
Value of the input pin is copied to the output pin, demonstrated by the
LED on if the pushbutton is pressed. |
16F84A
(ASM) |
16F84A
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F84A
(ASM, C) |
02 - Blink
LED will blink independently. |
16F84A
(ASM) |
16F84A
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F84A
(ASM, C) |
03 - Blinking
LED will blink until pushbutton is not pressed. Use the internal timer. |
16F84A
(ASM) |
16F84A
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F84A
(ASM, C) |
04 - Display
If one of eight pushbuttons is pressed, the display shows 1 - 8. |
16F84A
(ASM) |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
16F84A
(ASM, C) |
05 - Counter
Counter 0 - 9999, using the LED display which increments its value with 1 second period. |
16F84A
(ASM) |
16F84A
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F84A
(ASM, C) |
| Level II - basic peripheral control |
20 - A/D Converter
Use onboard photosensor to control LED blinking frequency. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
16C710
(ASM) |
21 - A/D Converter 2
The LED display shows 0 - 1023 (0 - 255) in dependence on trimmer 1 position. |
- |
16C710
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16C710
(ASM) |
22 - Analogue Comparator
The LED display shows "Hi" or "Lo" in dependence on trimmer 1 and trimmer 2 position. |
- |
16C710
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
23 - Serial EEPROM 93xx
Use 3-wire EEPROM to store last LED display state. Use Synchronous Serial Port (SSP) peripheral. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
24 - Serial EEPROM 93xx
Use 3-wire EEPROM to store last LED display state. Use software solution. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
16F627
(ASM, C) |
25 - Serial EEPROM 24xx
Use I2C EEPROM to store last LED display state. Use Synchronous Serial Port (SSP) peripheral. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
26 - Serial EEPROM 24xx
Use I2C EEPROM to store last LED display state. Use software solution. |
- |
16F627
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F627
(ASM, C) |
27 - Thermometer
Use onboard temperature sensor. |
- |
16F627
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
28 - PWM
Use PWM output to generate tones. |
- |
16F627
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F627
(ASM, C) |
29 - Sound-level-meter
Use microphone to measure sound level. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
16C710
(ASM) |
30 - LCD
Print "Hello, World!" on LCD module. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
16F627
(ASM, C) |
31 - Infra-Red proximity sensor
Use onboard IR LED and IR receiver. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
16F627
(ASM, C) |
32 - UART Tx
Send "Hello, World!" to PC serial port. |
- |
16F627
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
16F627
(ASM, C) |
33 - UART Rx
Display received data on LED display.
|
- |
16F627
(ASM) |
16F877/A (ASM ,C)
18F4520 (ASM) |
- |
| Level III - complex examples |
50 - Electronic piano
Use PWM output to generate tones
|
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
51 - Alarm clock
Use PWM output to generate tones
|
- |
16F627
(ASM) |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
52 - Security alarm
Trigger alarm when sudden change of light, temperature or sound
condition is detected. Use 4 digit code to arm/disarm the
system.
|
- |
-
|
16F877/A (ASM, C)
18F4520 (ASM) |
- |
53 - Infra-Red Receiver
Universal IR remote decoder, compatible with IRAMP/IRMAN. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
- |
54 - Sound Recording
Record short voice message and transfer it to PC. |
- |
- |
16F877/A (ASM, C)
18F4520 (ASM) |
- |